wen vs harbor freight dust collector


Anyone has a WEN 3403 dust collector? – Sawmill Creek

  • Author: sawmillcreek.org
  • Date: 29/08/2022
  • Rated: 1.67
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: May 27, 2020 — And buying the WEN would be cheaper than HF + Rikon impleller update. Wen 2403 – $284. Harbor Freight – $299 ($179 for the DC + $120 for the …

Top 8 Best Dust Collectors – Master Daily

  • Author: masterdaily.net
  • Date: 20/03/2022
  • Rated: 2.61
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: WEN 3401 5.7-Amp 660 CFM Dust Collector — The WEN 12-Gallon Dust Collector will absolutely keep your working environment clean and organized.

Anyone have Wen Dust Collector? – Lumberjocks

  • Author: www.lumberjocks.com
  • Date: 13/04/2022
  • Rated: 4.52
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Sep 12, 2019 — Been wanting/needing to get a dust collector and came across this at Home … around $135 or so and buy the Harbor Freight dust collector.

All Replies on Harbor Freight Dust Collector question

  • Author: www.lumberjocks.com
  • Date: 22/01/2022
  • Rated: 4.97
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Sep 20, 2021 — ALso hearing that WEN dust collector. P/N is 3403-022 Turbo Fan is same as Rikon, but 90$ cheaper. Not sure I’d put a 40$ impeller on something …

Which dust collector to buy? – General Woodworking Talk

  • Author: www.woodtalkonline.com
  • Date: 01/07/2022
  • Rated: 2.61
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Feb 2, 2014 — The Harbor Freight is rated at 2 HP, but we all know how accurate HP ratings are. I have heard that the impeller size on the HP version is …

Dust Collector opinions | NC Woodworker

  • Author: www.ncwoodworker.net
  • Date: 06/11/2021
  • Rated: 3.01
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Jun 3, 2018 — In researching 2HP dust collectors there is a wide range in price from $200 to $1200. What is anyone’s opinion on Harbor Freight?

The best Dust Collection deal in the universe is back!

  • Author: www.routerforums.com
  • Date: 05/01/2022
  • Rated: 2.95
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: May 28, 2017 — Harbor Freight’s fantastic deal on their 2HP, 70 gallon dust collector is back. On sale this month at $199, but this weekend with an …

70 gallon 2 HP High Flow High Capacity Dust Collector

  • Author: www.harborfreight.com
  • Date: 26/08/2022
  • Rated: 4.71
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Amazing deals on this 70 Gallon 2Hp Hi Flo Dust Collector at Harbor Freight. Quality tools & low prices.

Central Machinery (Harbor Freight) 2 HP dust collector …

  • Author: www.daves-workshop.com
  • Date: 18/12/2021
  • Rated: 1.83
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Nov 22, 2021 — I went with the Wen. All of the online tests of this modification alone show increased CFM of at least 35%, and static pressure (vacuum) …

WEN 3403 1500 CFM 16-Amp 5-Micron Woodworking Dust …

  • Author: wenproducts.com
  • Date: 05/01/2022
  • Rated: 1.38
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Great dust collector for the money … I got this unit a few months back and I have to say its power is very reliable. I did however swap out the bag with a 1 …

WEN DC3474 7.4-Amp Rolling Dust Collector

  • Author: www.woodworkingtalk.com
  • Date: 21/10/2021
  • Rated: 4.59
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Jul 12, 2022 — Not if the post you read was regarding one of those small Wen units, but I did the same mod, for the same reason on my Harbor Freight 2HP dust …

Reviews for WEN 1500 CFM 16 Amp 5-Micron Woodworking …

  • Author: www.homedepot.com
  • Date: 28/05/2022
  • Rated: 3.34
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Great dust collector. Has lots of suction and no complaints on that part. The coasters that come with it are absolutely junk. Throw away and put better quality …

Wen 3403-022 impeller on Harbor freight Dust Collector. A …

  • Author: www.reddit.com
  • Date: 17/04/2022
  • Rated: 3.26
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Aug 20, 2022 — The HF one is a forward curved vs the Wen is a backward curved impeller. BC impellers in general have better airflow performance (airflow and …

Harbor Freight dust collector impeller upgrade PSA – Reddit

  • Author: www.reddit.com
  • Date: 17/01/2022
  • Rated: 1.06
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: May 24, 2022 — In case anyone’s been looking to upgrade their HF 2hp dust collector to a bigger impeller and having trouble finding the actual part, Wen’s …

Harbor Freight Collectors – Wynn Environmental

  • Author: wynnenv.com
  • Date: 24/05/2022
  • Rated: 2.99
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: The Harbor Freight dust collector is one of the more popular systems on the market. It is effective, reliable, and inexpensive. And while we do not endorse.

Best Dust Collectors reviewed: Keep your home or (work …

  • Author: toolsdoctor.com
  • Date: 29/03/2022
  • Rated: 4.39
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Apr 13, 2022 — Frequently Asked Questions; Dust Collector vs. … with the frequency of a shop vacuum, Harbor Freight’s dust collector is about 80 dB, …

Low Cost Dust Collectors vs Shop-Vac – Matter-Replicator

  • Author: www.matter-replicator.com
  • Date: 27/08/2022
  • Rated: 3.92
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: Aug 8, 2022 — Harbor Freight had two Dust collectors. … One of them was listed as “WEN DC3401 5.7-Amp 660 CFM Rolling Dust Collector with 12-Gallon Bag …

Best Pipe Size For Harbor Freight Dust Collector

  • Author: www.woodworkhubby.com
  • Date: 17/01/2022
  • Rated: 4.37
  • Highest rated: 5
  • Lowest rated: 1
  • Summary: I have found that Harbor Freight Dust Collectors are very popular and many people want to get the pipe size right to ensure you get…

How many CFM is the Harbor Freight dust collector?

PVC and metal pipes are used for dust collection. It's a matter of personal preference. PVC pipes are commonly used for dust collection because it's light, easy to glue up or tape together, and inexpensive. Metal pipes offer high strength, superior rigidity, and minimize static discharge in dust collection pipe.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

What is the best dust collector for home?

Use PVC sewer and drain pipe instead of the heavier, more expensive schedule 40 PVC. Fasten joints with screws rather than glue so you can open the system easily to dislodge jams. Run a 5"-6"-diameter line to your heaviest chip-producers—planer, jointer, etc. —and locate the collector as close to them as possible.

Source: https://www.woodmagazine.com/woodworking-plans/dust-collection/installing-a-dust-collection-system

How many microns is good for a dust collector?

Though all of our experts agree that you'll pick up a good amount of dust with a dry microfiber cloth, several of them suggest dampening your microfiber cloths with water or spraying them with an all-purpose cleaner before use, to help them grip and remove dust better.

Source: https://nymag.com/strategist/article/how-to-get-rid-of-dust.html

Can you use PVC pipe for dust collection systems?

Clean your filters often! When the lower bags in a two- or four-bag chip collector fill up, the unit's filter area is effectively cut in half. This not only reduces suction significantly, but the higher air pressure inside the bag also forces fine dust particles through the fabric and into the shop air.

Source: https://www.rockler.com/learn/improve-home-workshops-dust-control-collection-system

What size pipe should I use for a dust collection system?

When setting up a ventilation system we typically figure a 7% loss in CFM for every 25 ft. when using flexible ducting (a 3% loss if using metal duct pipe). You should also factor a 3% loss for every 90 degree bend in your ductwork.

Source: https://www.planetnatural.com/forums/topic/cfm-loss-ducting/

How do I choose a dust collector?

At the smaller end of the metal swarf spectrum lies inhalable metal dust. This is made up of particles that are 100 microns to 30 microns in size. For reference, human hair ranges from 17 microns to 180 microns.

Source: https://www.vodex.co.uk/blog/metal-grinding-different-types-of-metal-particles/

What picks up dust best?

But if the generating saw dust amount is high, better to stick with a 6” PVC pipe for an effective dust collection process with maximum airflow. Make sure not to go below 4” pipe sizes, because they will significantly cut off the airflow and reduce the suction power of the dust collection system.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How do you increase dust suction?

PVC and metal pipes are used for dust collection. It's a matter of personal preference. PVC pipes are commonly used for dust collection because it's light, easy to glue up or tape together, and inexpensive. Metal pipes offer high strength, superior rigidity, and minimize static discharge in dust collection pipe.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How much CFM do you lose per foot?

Use PVC sewer and drain pipe instead of the heavier, more expensive schedule 40 PVC. Fasten joints with screws rather than glue so you can open the system easily to dislodge jams. Run a 5"-6"-diameter line to your heaviest chip-producers—planer, jointer, etc. —and locate the collector as close to them as possible.

Source: https://www.woodmagazine.com/woodworking-plans/dust-collection/installing-a-dust-collection-system

What size pipe should I use for a dust collection system?

Though all of our experts agree that you'll pick up a good amount of dust with a dry microfiber cloth, several of them suggest dampening your microfiber cloths with water or spraying them with an all-purpose cleaner before use, to help them grip and remove dust better.

Source: https://nymag.com/strategist/article/how-to-get-rid-of-dust.html

Can you use PVC pipe for dust collection systems?

Clean your filters often! When the lower bags in a two- or four-bag chip collector fill up, the unit's filter area is effectively cut in half. This not only reduces suction significantly, but the higher air pressure inside the bag also forces fine dust particles through the fabric and into the shop air.

Source: https://www.rockler.com/learn/improve-home-workshops-dust-control-collection-system

What size pipe should I use for a dust collection system?

When setting up a ventilation system we typically figure a 7% loss in CFM for every 25 ft. when using flexible ducting (a 3% loss if using metal duct pipe). You should also factor a 3% loss for every 90 degree bend in your ductwork.

Source: https://www.planetnatural.com/forums/topic/cfm-loss-ducting/

How do I choose a dust collector?

At the smaller end of the metal swarf spectrum lies inhalable metal dust. This is made up of particles that are 100 microns to 30 microns in size. For reference, human hair ranges from 17 microns to 180 microns.

Source: https://www.vodex.co.uk/blog/metal-grinding-different-types-of-metal-particles/

What picks up dust best?

But if the generating saw dust amount is high, better to stick with a 6” PVC pipe for an effective dust collection process with maximum airflow. Make sure not to go below 4” pipe sizes, because they will significantly cut off the airflow and reduce the suction power of the dust collection system.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How do you increase dust suction?

PVC and metal pipes are used for dust collection. It's a matter of personal preference. PVC pipes are commonly used for dust collection because it's light, easy to glue up or tape together, and inexpensive. Metal pipes offer high strength, superior rigidity, and minimize static discharge in dust collection pipe.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How much CFM do you lose per foot?

Use PVC sewer and drain pipe instead of the heavier, more expensive schedule 40 PVC. Fasten joints with screws rather than glue so you can open the system easily to dislodge jams. Run a 5"-6"-diameter line to your heaviest chip-producers—planer, jointer, etc. —and locate the collector as close to them as possible.

Source: https://www.woodmagazine.com/woodworking-plans/dust-collection/installing-a-dust-collection-system

What size pipe should I use for a dust collection system?

Though all of our experts agree that you'll pick up a good amount of dust with a dry microfiber cloth, several of them suggest dampening your microfiber cloths with water or spraying them with an all-purpose cleaner before use, to help them grip and remove dust better.

Source: https://nymag.com/strategist/article/how-to-get-rid-of-dust.html

Can you use PVC pipe for dust collection systems?

Clean your filters often! When the lower bags in a two- or four-bag chip collector fill up, the unit's filter area is effectively cut in half. This not only reduces suction significantly, but the higher air pressure inside the bag also forces fine dust particles through the fabric and into the shop air.

Source: https://www.rockler.com/learn/improve-home-workshops-dust-control-collection-system

What size pipe should I use for a dust collection system?

When setting up a ventilation system we typically figure a 7% loss in CFM for every 25 ft. when using flexible ducting (a 3% loss if using metal duct pipe). You should also factor a 3% loss for every 90 degree bend in your ductwork.

Source: https://www.planetnatural.com/forums/topic/cfm-loss-ducting/

How do I choose a dust collector?

At the smaller end of the metal swarf spectrum lies inhalable metal dust. This is made up of particles that are 100 microns to 30 microns in size. For reference, human hair ranges from 17 microns to 180 microns.

Source: https://www.vodex.co.uk/blog/metal-grinding-different-types-of-metal-particles/

What picks up dust best?

But if the generating saw dust amount is high, better to stick with a 6” PVC pipe for an effective dust collection process with maximum airflow. Make sure not to go below 4” pipe sizes, because they will significantly cut off the airflow and reduce the suction power of the dust collection system.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How do you increase dust suction?

PVC and metal pipes are used for dust collection. It's a matter of personal preference. PVC pipes are commonly used for dust collection because it's light, easy to glue up or tape together, and inexpensive. Metal pipes offer high strength, superior rigidity, and minimize static discharge in dust collection pipe.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How much CFM do you lose per foot?

Use PVC sewer and drain pipe instead of the heavier, more expensive schedule 40 PVC. Fasten joints with screws rather than glue so you can open the system easily to dislodge jams. Run a 5"-6"-diameter line to your heaviest chip-producers—planer, jointer, etc. —and locate the collector as close to them as possible.

Source: https://www.woodmagazine.com/woodworking-plans/dust-collection/installing-a-dust-collection-system

What size pipe should I use for a dust collection system?

Though all of our experts agree that you'll pick up a good amount of dust with a dry microfiber cloth, several of them suggest dampening your microfiber cloths with water or spraying them with an all-purpose cleaner before use, to help them grip and remove dust better.

Source: https://nymag.com/strategist/article/how-to-get-rid-of-dust.html

Can you use PVC pipe for dust collection systems?

Clean your filters often! When the lower bags in a two- or four-bag chip collector fill up, the unit's filter area is effectively cut in half. This not only reduces suction significantly, but the higher air pressure inside the bag also forces fine dust particles through the fabric and into the shop air.

Source: https://www.rockler.com/learn/improve-home-workshops-dust-control-collection-system

What size pipe should I use for a dust collection system?

When setting up a ventilation system we typically figure a 7% loss in CFM for every 25 ft. when using flexible ducting (a 3% loss if using metal duct pipe). You should also factor a 3% loss for every 90 degree bend in your ductwork.

Source: https://www.planetnatural.com/forums/topic/cfm-loss-ducting/

How do I choose a dust collector?

At the smaller end of the metal swarf spectrum lies inhalable metal dust. This is made up of particles that are 100 microns to 30 microns in size. For reference, human hair ranges from 17 microns to 180 microns.

Source: https://www.vodex.co.uk/blog/metal-grinding-different-types-of-metal-particles/

What picks up dust best?

But if the generating saw dust amount is high, better to stick with a 6” PVC pipe for an effective dust collection process with maximum airflow. Make sure not to go below 4” pipe sizes, because they will significantly cut off the airflow and reduce the suction power of the dust collection system.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How do you increase dust suction?

PVC and metal pipes are used for dust collection. It's a matter of personal preference. PVC pipes are commonly used for dust collection because it's light, easy to glue up or tape together, and inexpensive. Metal pipes offer high strength, superior rigidity, and minimize static discharge in dust collection pipe.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/

How much CFM do you lose per foot?

Use PVC sewer and drain pipe instead of the heavier, more expensive schedule 40 PVC. Fasten joints with screws rather than glue so you can open the system easily to dislodge jams. Run a 5"-6"-diameter line to your heaviest chip-producers—planer, jointer, etc. —and locate the collector as close to them as possible.

Source: https://www.woodmagazine.com/woodworking-plans/dust-collection/installing-a-dust-collection-system

What size pipe should I use for a dust collection system?

Though all of our experts agree that you'll pick up a good amount of dust with a dry microfiber cloth, several of them suggest dampening your microfiber cloths with water or spraying them with an all-purpose cleaner before use, to help them grip and remove dust better.

Source: https://nymag.com/strategist/article/how-to-get-rid-of-dust.html

Can you use PVC pipe for dust collection systems?

Clean your filters often! When the lower bags in a two- or four-bag chip collector fill up, the unit's filter area is effectively cut in half. This not only reduces suction significantly, but the higher air pressure inside the bag also forces fine dust particles through the fabric and into the shop air.

Source: https://www.rockler.com/learn/improve-home-workshops-dust-control-collection-system

What size pipe should I use for a dust collection system?

When setting up a ventilation system we typically figure a 7% loss in CFM for every 25 ft. when using flexible ducting (a 3% loss if using metal duct pipe). You should also factor a 3% loss for every 90 degree bend in your ductwork.

Source: https://www.planetnatural.com/forums/topic/cfm-loss-ducting/

How do I choose a dust collector?

At the smaller end of the metal swarf spectrum lies inhalable metal dust. This is made up of particles that are 100 microns to 30 microns in size. For reference, human hair ranges from 17 microns to 180 microns.

Source: https://www.vodex.co.uk/blog/metal-grinding-different-types-of-metal-particles/

What picks up dust best?

But if the generating saw dust amount is high, better to stick with a 6” PVC pipe for an effective dust collection process with maximum airflow. Make sure not to go below 4” pipe sizes, because they will significantly cut off the airflow and reduce the suction power of the dust collection system.

Source: https://woodworkly.com/what-kind-of-pipe-to-use-for-dust-collection/


Videos:

Dust Collector Suction Comparison

Dust Collector Suction Comparison

New Dust Collector | WEN 3403 Dust Collector | Unboxing …

New Dust Collector | WEN 3403 Dust Collector | Unboxing ...

WEN 3401 Dust Collector – 1 Year Later Review!

WEN 3401 Dust Collector - 1 Year Later Review!

Product Review: WEN 3401 600cfm Dust Collection System

Product Review: WEN 3401 600cfm Dust Collection System


Đánh giá chất lượng bài viết